Shenjia Hydraulic

Release time:

2024-09-10

Regular Cleaning:Clean the probe surface with mild soapy water or medical disinfectant, avoiding caustic or abrasive cleaners. After cleaning, wipe dry with a clean cloth or air dry naturally to avoid moisture residue.

Regular Cleaning:

Clean the probe surface with mild soapy water or medical disinfectant, avoiding caustic or abrasive cleaners.

After cleaning, wipe dry with a clean cloth or air dry naturally to avoid moisture residue.

Sterilization:

Choose the appropriate sterilization method according to the material of the probe and the manufacturer's instruction. Usually 70% medical alcohol or special medical disinfectant is used for sterilization.

After disinfection, make sure the probe is completely dry before use.

Check for damage:

Periodically inspect the probe for cracks, wear and tear, or other physical damage.

If damage is found, discontinue use immediately and contact the manufacturer or a service professional for repair or replacement.

Calibration Checks:

Perform calibration checks periodically to ensure the accuracy of the probe's measurements.

If calibration results show deviations, adjustments should be made or sent for repair according to the manufacturer's instructions.

Storage conditions:

When not in use, store the probe in a dry, clean, dust-free environment.

Avoid exposing the probe to extremes of temperature, humidity or direct sunlight.

Battery Replacement:

If the temperature probe is battery powered, periodically check the battery status and replace the batteries according to the manufacturer's recommendations.

When replacing batteries, ensure that proper procedures are followed to avoid damaging the probe with leaking batteries.

Software Updates:

If the probe is connected to an electronic device, periodically check for software updates to ensure probe performance and compatibility.

Specialized Repairs:

For complex repair or maintenance work, contact a professional repair service provider or the manufacturer's after-sales service.

Do not disassemble the probe yourself as this may cause further damage or safety risks.

Record maintenance:

Record the date and details of each cleaning, disinfection, calibration and repair to track the maintenance history of the probe.

Train operators:

Ensure that all operators are trained in proper use and maintenance to minimize the risk of misuse and improper maintenance.